New Baxi Assure Boilers have two ways of finding the pressure.
Pressure reading on the analogue gauge.
The first is the old fashioned dial on the front of the boiler.
The pointer shows where the pressure is on the dial. When the radiators are cold and the boiler isn’t running the pressure should be about 1bar.
Early models of the Baxi Assure didn’t have this gauge so you will have to use the second method.
Pressure reading on the digital display
The second is the digital display on the front of the boiler.
When there is no demand the boiler displays the pressure on the digital display.
The screen tells you that everything is OK and the pressure is 1.0bar.
If you found this confusing:
If you found this confusing. Please let us know in the comments section so we can clear things up for you. We love feedback and we are trying to make the best possible website. If you don’t understand then others don’t as well.
If you found this useful:
If you found this useful maybe check some of our other pages.
- My radiators are too hot
- Vaillant F28 fault
- Common causes of a Vaillant F75 fault
- Boiler pressure dropping
- E160 Fault on Baxi or Potterton Boiler
- Expansion vessel problems
- F1 low pressure fault on an Ideal Logic boiler
- Filling loop left open
- Do I need a powerflush?
- E50 fault
- Hello deary